Soleus GPS Cross Country (SG005) - Manual User Manual

Gps cross country user manual, Introduction, Getting started

Advertising
background image

GPS Cross Country

GPS Cross Country User Manual

Introduction

Thank you for purchasing the Soleus Cross Country GPS Watch. This GPS Watch is packed
with personal Training features like speed, trip time, laps, etc. Watch features include but not
limited to the following:

Ø

12/24H Time format

Ø

Chronograph

Ø

World time

Ø

Dual Time T1 and T2

Ø

5 daily Alarms

Ø

RUN mode

Ø

Chronograph mode

Ø

Timer mode

Ø

Altimeter mode ( GPS based)

Ø

Compass mode ( GPS based)

Ø

Data mode

Ø

Set modes

v

This Watch can communicate with a PC to store and review your

performance.

v

This Watch uses a rechargeable battery that can be charged through USB

port of your PC.


Caring for your GPS Watch:

Clean your GPS Watch with a dampened cloth preferably with mild detergent solution. Wipe
dry using a dry cloth. Do not use chemical cleaners and solvents that may damage plastic
components.

Do not store your GPS Watch to prolonged exposure to extreme temperatures as this may
result to permanent damage to your unit.

About GPS:

Global Positioning System (GPS) is a satellite- based navigation system made up of a
network of 24 or more satellites. GPS works best in clear weather condition, anywhere in the
world, 24 hours a day. Tall buildings may interfere with GPS accuracy. When 3 satellite
signals are received, the Watch will have 2D GPS fixed (Latitude and Longitude). When 4 or
more satellite signals are received, the Watch will have 3D GPS Fixed.





Water immersion:

This GPS Watch is designed to be water resistant up to 3 ATM. It can resist water pressure
up to 30 meters. After submersion to water, please make sure to wipe dry and air dry the unit
before using or charging.

Caution
:

v

Prolonged water submersion may cause electronic shorting in the unit which may

cause minor skin burn or irritation.



Getting Started

Step 1) Know your Watch:

Push button location


Push button Main function:

S1 – Start / Stop / Hold to Save / Increase adjust (+)
S5 –
View
S7 – Change Mode / Exit
S11 – Light / Set / Save / Lap / Decrease adjust (

-

)

Advertising