Soleus GPS Pulse (SG008) - Manual - Manual

Soleus GPS Pulse
Introduction
Thank you for purchasing the Soleus GPS Pulse watch. This product uses an Electro-optical
technology to sense the heart beat. It has two LED beams and electro-optical cell to sense
the volume of blood under your skin.
Note that the actual color of the watch and artwork may vary from style to style.
How to wear the watch properly in your forearm:
• Fasten the watch snugly so that the optical sensor makes a tight contact with your skin.
The tighter you can wear the watch the better.
• Wear the watch not on your wrist bone but higher on your forearm.
Important note:
Before starting your exercise
• You may need to tighten the strap.
** After sweating, you have to tighten the watch again for more accurate
measurement.
• Make sure the heart rate reading is already stable.
• Minimize extreme wrist movement while the HR is in use
Caring for your Watch:
Clean your Watch with a dampened cloth preferably with mild detergent solution. Wipe dry
using a dry cloth. Do not use chemical cleaners and solvents that may damage plastic
components.
Do not store your Watch to prolonged exposure to extreme temperatures as this may result to
permanent damage to your unit.
Getting Started
Step 1) Know your Watch:
• This product has also a GPS function with the following main modes as you press S7:
TIME, RUN, CHRONO, TIMER, HRM, DATA, ALARM and SET mode.
Push button main function:
Caution:
• Consult your doctor before you begin a new exercise program.
• This watch provides heart rate measurements. However, this is not a medical device.
• This watch may affect pacemakers. If you have any concerns, consult your doctor
before using this watch.