Cisco XR 12404 - Manual (Page 131)

5-7
Cisco XR 12404 Router Installation Guide
OL-13830-02
Chapter 5 Maintaining the Router
Removing and Installing the Front Cover
Step 4 Remove the bumpers and pivot blocks from the cover as shown in Figure 5-4 .
Figure 5-4 Removing the Bumpers and Pivot Blocks
Step 5 Reinstall the hardware to the opposite sides of the front cover:
a. Mount pivot blocks to the left side and tighten the screws until snug.
b. Mount the bumpers to the right side and tighten the screws until snug.
1 Bumpers 2 Pivot Blocks
149469
2
1
todd.book Page 7 Monday, March 16, 2009 2:47 PM