SONIQ DVR200 - Manual (Page 9)

8
Quick Start Guide
Select OK SELECT
Clock Setting
Select OK SELECT
Auto Scan
Select OK SELECT
Complete
OK SELECT
Setup has been completed
Enjoy using your recorder
When you switch the recorder on for the first time, on the
screen will come out dialog boxes opposite which will
guide you to make several basic settings step by step.
1. Press SELECT to go to next page.
2. Clock Setting is necessary for the future recording.
Use the numeric keys on the remote to input the date and
time of the local, for example,
3:21 morning on Feb 1st in 2004:
input 1 in the first blank, then 2, 2004, 3, 21 in the
following blank respectively, press < or > to cursor
through the items, with the last blank highlighted
press / to select, am or pm.
Besides inputing numbers, you can also press / to
increase or decrease the number of the year, month,
day, time, etc.
3. Use / to highlight your suitable OSD language,
i.e. English, French or German, and press SELECT to
confirm it.
If the Back is selected, it will return to the previous step.
It’s same in all of the other menus.
4. After finishing all of the above setting, the recording
starts auto scan then.
The bar and the number besides indicate the proceeding
of the scan.
With the Cancel highlighted, press SELECT to cancel the
auto scan for TV channels.
5. With the channels found, on the screen appears the
menu “CH List”, you can edit each channel by it,e.g.
rename, sort, skip, delete, details refer to the chapter
“Recording Siginal fromTV Tuner”.
6. At last the dialog box will display “ Setup has been
completed, Enjoy using your recorder”.
With the Finish highlighted, press SELECT to remove the
menu.
All of the channels the unit searched will be stored into
memory orderly.
INITIAL SETUP
SELECT
CH List
Exit with save
OK
Cancel
Highlight
Skip
NO. NAME SKIP
CH 1 -- Off
CH 2 -- Off
CH 3 -- Off
CH 4 -- Off
Back