SONIQ E32S12A - Manual (Page 22)

LOCK MENU
Press MENU to bring up the OSD menu.
Use button to turn to LOCK page, it will highlight the first option, then you are required to input the password
(default as 0000).
Back LOCK
LOCK
Back Select
Enter Password ----
Lock System On
Block Program
Parental Guidance Block G
Set Password ----
Press “OK” button to operate Lock System, then use button to select On/Off.
Block Program: Press to select Block Program, then press “OK” button to enter sub-menu, Press button
to select the program you want to lock, then press “OK” on your remote. (To unlockthe program , press “OK” again).
Parent Guidance: Parent can set age limit level by this function.
Set Password: Press button to select Set Password, then press “OK” button to allow you to
input “0000” to set new password.
PVR Function
PVR Settings
(This feature is only available under DTV mode).
Precautions when using the USB Device
OSD Menu Operation
1. Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged.
2. Please use only USB storage devices that are fomatted as a FAT32 file system. In case of a storage device
formatted as a different format which is not supported by system, it may not be recognized.
3. Every USB only supplys 500mA electric current, if the user's device requirement is over this specification, users
need to choose to connect to the external power supply, otherwise the device may not be recognized.
4. If the USB HDD does not have an external power supply, the USB device may not be detected. So be sure to
connect the external power supply.
5. The recommended capacity is 2TB or less for a USB external hard disk and 32GB or less for USB flash memory.
6. The recognition speed of a USB storage device may depend on each device.
7. Please connect a USB storage device with the cable offered by the device maker.
8. Be sure to back up important files since data stored in a USB memory device may be damaged. We will not be
responsible for any data loss.
9. If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4
partitions or USB memory devices.
10. If the USB memory device does not work properly, disconnect and reconnect it. How fast a USB memory device
is detected differs from device to device.
11. If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on.
12. Any device with more than the recommended capacity may not work properly.
Recording
Use the record function when you need to watch your desired programme at a later time.
Start/Stop record
You can record the programmed you are watching.
Start record
1.Press REC on the remote to start the recording.
Recording
Stop record
stop record?
9 Secs
Yes NO
OSD Menu Operation
1. Press STOP button to stop the recording.
2. Press Navigation buttons to scroll to Yes, and press OK button.
Reserved Recording is another function for PVR.
Enter PVR Settings from OPTION menu as below:
Use navigation buttons to scroll through different functions from this area.
Press OK button to open FILE MANAGER.
Film Manager
Scheduled Record 2007/06/09 Sat USB Status
Standby 20:19 USB is ready
PRIME_HD_30_Rock_20200302_001109.ts
PRIME_HD_30_Rock_20100301_235642.ts
PRIME_HD_30_Rock_20100301_235920.ts
PRIME_HD_Seven_Early New_20100301_2...
PRIME_HD_30_Rock_20100301_235354.ts
Current Play File Info
Total Time 00:00:36
Current Time 00:00:09
File Size 46MB
Device Info
Device sda1
Free Space 120 MB
Delete One Delete All Play Zoom on/out
Film
M
anager
-41- -42-