Customizing – SONIQ QPB302B User Manual
Page 21
-21-
{
Bitstream} – output digital signal
without any processing.
{
PCM} – output digital signal with
processing, only two channels export.
When Connect a HDMI cable from the
HDMI OUTPUT jack on this product to
the HDMI input jack on the TV, output
multi channels export.
{
Reencode} – Auto select signal type
from Digital Out jack according to the
Audio streamon disc.
{
Off} – Disconnet bit stream export.
•
[HDMI]
Select the output mode of HDMI Digital
Out jack, options include Bitstream,
PCM, Reencode and Off.
{
Bitstream} – output HDMI digital signal
without any processing.
{
PCM} – output digital signal with
processing, only two channels export.
When Connect a HDMI cable from the
HDMI OUTPUT jack on this product to
the HDMI input jack on the TV, output
multi channels export.
{
Reencode} – Auto select signal type
from Digital Out jack according to the
Audio streamon disc.
{
Off} – Disconnet bit stream export.
•
[Down_samp]
Select the digital audio signal sampling
frequency.
{
48K} – For discs recorded at sampling
rate of 48 KHz.
{
96K} – For discs recorded at sampling
rate of 96 KHz.
{
192K} – For discs recorded at sampling
rate of 192 KHz.
•
[DRC]
Select the Dynamic Range Control
mode which makes it available to listen
to a movie at a low volume without
losing sound clarity.
{
On} – Dynamic range compress.
{
Off} – Non-dynamic range compress.
{
Auto} – Adjust the DRC according to
input audio.
System Information
1. Press
. Press
Press
SETUP
[General Setting] menu is displayed.
2. Press
. Press
Press
to select [System
Information],
- The current software version and MAC
address display
- Press
to return to the previous
menu.
- Press
SETUP to exit the menu.
SETUP Exit
Use cursor key to move focus,use
“Enter ” key ro select
Software version: BDP V3.0
MAC: 00-1C-50-XX-XX-XX
... System Information ...
Customizing