SONIQ QSL326T - Manual (Page 10)

Tint
Brightness
This compensates for the color variations in NTSC transmissions
50
TV menu \ Picture
0
Color 50
Sharpness 9
Tone Cool
Noise reduction On
Back Light 80
Picture format 16:9 format
This allows you to reset your settings for viewing to predefined
factory settings
TV menu \ Picture
Picture Preset
Contrast
Brightness
50
Standard
50
Color 50
Sharpness 9
Tone Cool
Noise reduction On
Back Light 80
10
Advanced Functions Chapter 3
The menus for adjusting the picture are used to obtain the best picture setting
according to your preference, the type of program you are watching and the ambient
lighting.
Display the menu by pressing the Menu button. Press the up or down direction button
to select PICTURE and press the OK button
direction button to confirm.
The PICTURE options are as below:
Note: Some options may be not available for certain signal sources.
Picture Preset: use direction through the picture preset
settings: Standard, Dynamic, Power saving, Personal and Bright.
Contrast: adjusts the difference between light and dark areas of the picture.
Brightness:
Color:
Back Light: this option can be used to adjust the brightness of the back light,
depending on room lighting. Use the left or right direction button to adjust.
Note: When the value of Back light exceeds the defaulted value in Standard mode, the
TV will not satisfy the MEPS certification. And when turning on the TV next time, a
prompt will appear.
Sharpness:
his function is not available in VGA mode.
Tone: adjusts the color temperature of the picture. Use direction
.
Noise reduction:
Tint:
Picture format: use direction elect the picture size:
16:9 format and 4:3 format. (Note: You are recommended to use the full screen
mode. Do not use the display mode with black bars on both sides of the picture (such
as 4:3) for long time, otherwise the LCD screen may be damaged permanently.)
P
or the right
ress the Menu button to return or press the Exit button to close the menu.
the left or right button to scroll
adjusts the brightness of the picture.
adjusts the richness of color.
adjusts the crispness of the edges in the picture.
Note: T
the left or right button
to scroll through the color settings: COOL for a more blue palette of picture colors;
NORMAL; and WARM for a more red palette of picture colors
Sets the level at which noise is measured and reduced in the
picture.
adjusts the balance between the red and green levels.
Note: Tint is only available for the NTSC system.
the left or right button to s
Adjusting the Sound
Display the menu by pressing the Menu button. Press the up or down direction button
to select SOUND and press the OK button
direction button to confirm.
The SOUND options are as below:
Note: Some options may be not available for certain signal sources.
Sound Preset: use direction through the sound preset
settings: Standard, Movie, Music, Personal and News.
Bass: Improve bass output
Treble: Improve treble output
Balance: Use the left and right arrow buttons to balance the sound between the left
and right speakers.
Incredible Surround: select On mode for more spatial or surround sound reproduction.
Auto Volume Leveling: turns on this option to keep the same sound level for all
channels.
Audio Language: select an audio language out of the list of the available broadcasted
languages for the current digital program. Press the OK button or the right direction
button to display the language list, then use the up or down direction button to select
your preferred language available in the list, press the OK button to confirm.
P
or the right
ress the Menu button to return or press the Exit button to close the menu.
the left or right button to scroll
This allows you to reset your settings to predefined factory settings.
TV menu \ Sound
Bass
Treble
Balance
Music
75
75
Sound preset
0
Incredible surround Off
Auto volume leveling
Audio language Off
Adjusting the Picture