Sound Devices USBPre 2 User Manual
Page 5
USBPre 2 User Guide and Technical Information
4
Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
Input 1 set to Mic (XLR)
Input 2 set to Line (1/4” TRS)
If the PRE Meter Source LED is not illuminated, press the Meter Source button to change the meter
6.
source to display input levels.
For analog input sources, adjust the Input Gain Control corresponding to the input being recorded.
7.
Input Gain Controls do not affect digital input levels. The meters will show the audio level of the input.
Launch an audio application on the computer. Make certain that the USBPre 2 is selected as the input
8.
and output device in the application’s preferences. Consult the applications documentation for further
information.