Sound Devices 702 - Manual (Page 66)

702 User Guide and Technical Information
64
v. 2.67 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
# Setup Name Setup Description Setup Options
71 CF: Space Shows the drive file system, total size, and
space remaining on connected CompactFlash
medium.
72 CF: Erase / Format Formats installed CompactFlash medium
Caution, while various PC utilities are able to
recover files from re-formatted drives, once
formatted, old audio data is not accessible by
the 702.
73 CF: Empty Trash Allows user to delete files previously sent to
the trash as well as false takes.
• Empty Trash
• Empty False Takes
• Empty both
74 EXHDD: Space Shows the drive file system, total size, and
space remaining on connected Compact Flash
medium.
75 EXHDD: Erase / Format Formats attached FireWire storage volume
Caution, while various PC utilities are able to
recover files from re-formatted drives, once
formatted, old audio data is not accessible by
the 702.
76 EXHDD: Empty Trash Allows user to delete files previously sent to
the trash as well as false takes.
• Empty Trash
• Empty False Takes
• Empty both
77 Balance Cal Calibrates the center position of the input 2
pot when used as the balance control for MS
recording.
Place balance control to center and press to select.
78 Power: Ext Low Batt Volt Sets the warning voltage of the low battery
alert with an external power source. Internal
battery warning threshold is factory set.
10.0–18.0 VDC, 0.1 V steps
79 Power: Ext Power Function Controls the behavior of the unit when power
is applied to the external DC jack.
Pin-3 (+) of the external DC input must be
wired in order for the External Power Func-
tions to operate.
• Do Nothing
• Power On Unit
• Power On and Start Record
• Power On/Off unit
• Power On/Off unit and Record
80 Power: Power-up Messages Enables or disables the notifications that ap-
pear upon boot up (daily folder prompt, output
attenuation notice, and set time and date
message). Disabling these messages is useful
when using the External Power Functions to
power on and start recording and the Record
Start and Stop Timer.
• Disabled
• Enabled
81 Ext Keyboard: Assign Enter to setup keyboard shortcuts when using
the CL-1 keyboard interface
82 Ext Keyboard: Language Select the language of the keyboard attached
to the CL-1.
• English
• German
• French
83 CL-1: Re-program The CL-1 has its own firmware which is
supplied from the 702. This utility updates the
CL-1 firmware.
84 CL-1: Logic Out Assign Each logic output pin can be assigned to go
high when the unit is in the selected mode.
Logic input overrides logic output selection.
• Undefined
• Stop
• Play
• Pause
• Record
85 Info: Button Shortcuts An informative menu showing the available
keyboard shortcuts.
86 Info: Version Shows the hardware revision, serial number,
and firmware version of the unit.