Sound Devices MixPre-D - Manual (Page 15)

MixPre-D User Guide and Technical Information
13
Limiter • Threshold adjustable
• +6 dBu to +18 dBu
• 20:1 limiting ratio • 1 mS attack time
• 500 mS release time .
Metering • 16 segment x 2 GaN (Gallium Nitride) meters,
• peak + VU responding
Powering Internal: 2 AA alkaline batteries, 4 hours
life typical, no phantom power
External: 10-17 VDC via 4-pin Hirose, pin
4 = +, pin 1 = -, completely isolated float-
ing supply
USB Connectivity USB class-compliant device, analog input to USB output, USB monitoring in head-
phones
A/D Converter • 103 dB typical, A-weighted .
• Sample rate selectable 44 .1 k, 48 k, or 96 k .
Temperature • Operating: -20° C to 60° C, 0 to 95% relative humidity; (non-condensing)
• Storage: -40° C to 85° C
Weight 0 .7 kg, 1 .5 lbs with batteries
Dimensions 43 mm x 94 mm x 140 mm (h x w x d), (1 .7” x 3 .7” x 5 .5”)
Accessories
Several high-value accessories are available for the MixPre-D. For a full list of Sound Devices products
and accessories, visit our web site www.sounddevices.com/products.
Optional MixPre-D Related Accessories
XL-2F 25-inch XLR-F to TA3-F cable, used to connect the MixPre-D’s balanced
analog (XLR-M) outputs to units with balanced, TA3-M inputs (7-Series
recorders); package of two.
XL-4 Bag of four (4) TA3-F-type connectors.
XL-3 TA3-F to 3.5 mm TRS, used to connect the MixPre-D’s unbalanced, stereo
mic level output (TA3-M) to camera inputs, or for connecting the MixPre-
D’s Tape Output (3.5mm TRS) to the Mix Input (TA3-M) on a 302, or 552.
XL-AB Anton Bauer D-tap to Hirose 4-pin, 12-inch, to power mixer from Anton
Bauer-equipped camera
XL-CAM Removable top-mounted 1/4-20 thread mount
XL-TA25 TA5F to 3.5 mm TRS, 12-inch, used to connect MixPre-D Tape Output
(3.5mm) to 552 TA5M Link I/O (TA5M).
XL-H Bare Hirose 4-pin locking DC connector (HR10-7P-4P).
XL-NPH NP-type battery cup with 24-inch cable terminated in Hirose 4-pin lock-
ing DC connector (HR10-7P-4P) at equipment end.
XL-WPH3 AC to DC Power Supply (in-line) 100 - 240V 50/60 Hz input, 12 VDC 3.75
A (45 W) output, Hirose 4-pin DC plug. Supplied with 3-pin IEC cord for
use in North America and Japan.