Starlight Xpress SXVF-H9 - Manual (Page 4)

Handbook for the SXVF-H9 Issue 1 May 2007
4
‘System’. Now click on the tab labelled ‘Device Manager’ and all of the system
devices will be displayed in a list (see above). If the installation is successful, there
will be a diamond shaped symbol labelled ‘BlockIOClass’ and clicking on the ‘+’
sign will reveal it to be a ‘Starlight Xpress USB 2.0 SXV-H9 BlockIO camera driver’.
If this device is faulty, try clicking on it and selecting ‘properties’ and then ‘update
driver’. Following the on screen instructions will allow you to re-select the correct inf
file (SXVIO_H9_119.inf) and driver file (SXVIO.sys), which should fix the problem.
Adding the camera control software:
Now that the USB system is installed, the camera control program can be used to
operate your SXVF-H9. Copy the camera software files from the CD and paste them
into a suitable directory, such as ‘SXVH9’ on your computer’s C: drive. Your
directory should contain the files SXV_H9.exe, SXV_H9.hlp, bwcc32.dll and
wsc32.dll
Connecting the camera:
The camera rear panel