Stealth Cam STC-I550 - Manual (Page 15)

STC-I550
www.stealthcam.net Toll Free 877-269-8490 15
Set up and Programming
When the camera is first turned on the internal LCD screen
displays the camera status. The following information is present
on this screen.
Flash Mode Control:
The camera is pre-programmed with Auto Flash setting.
• Switch the camera to ON position.
• To turn off the flash mode, press the [UP] button
once within 30 seconds.
icon will appear on
the top of the screen.
• To turn on the flash mode back to Auto setting, press the [UP]
button the second time.
icon will appear on the top of the
screen.
If no buttons are pressed after 30 seconds, the LCD screen will
power down to conserve battery life and enter 1 minute count
down to enter PIR detection mode. To re-power the display