Stealth Cam STC-I840IR Rogue-IR - Manual (Page 34)

STC-I840IR
www.stealthcam.net Toll Free 877-269-8490
34
on your TV. (See your TV owner’s manual for directions)
Turn on the TV monitor and slide the camera power switch to TEST.

Your camera is preset to NTSC TV out system by default.

Press the OK button on the camera. This will display the last
image captured.

Using the LEFT/RIGHT buttons to select the image you wish to
view. Image number and total number of images in memory
will display on the center bottom of the screen.

Once you have selected the image you wish to view, press the
UP button. This will magnify the image on the screen.

Using LEFT/RIGHT/UP/DOWN buttons, you can move the
image to display different areas of the image.

To return to the image selection view from the magnified image
screen, press the OK button.