Stealth Cam STC-DVIR4 Sniper-IR - Manual (Page 25)

STC-DVIR4
www.stealthcam.net Toll Free 877-269-8490
25
 The IR Emitter will only activate in low light conditions.
Using the camera in manual shoot mode

Open the front housing and turn the camera on.

Close the front housing. The camera is now ready to be used
as hand held point and shoot camera.

The manual mode setting will perform the programmed setting
above. For example, if you program to capture 3 image burst
mode or a 10 second video, each time you press the manual
shutter button, it will capture 3 images or a 10 second video
clip respectively.

Above operation must be done within 30 seconds after you
power up the camera. Once it is in count down mode, you will
not be able to perform Manual shooting mode.