Stealth Cam STC-U840IRS1 - Manual (Page 5)

WWW.STEALTHCAM.COM
Toll Free 877-269-8490
17
Setting the Video Mode:
Your Stealth Cam can be programmed to record 10‐180 seconds of
video per triggering.
• Switch the camera to the ON position.
¾ LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
• Press [UP] button TWO times to enter Video setting mode.
• The word VIDEO will be blinking.
• Press [OK] button and the video length in seconds will be blinking.
• Press [UP] or [DN] button to select the desired video length from
10 to 180 seconds in 5 second increments.
• Press [OK] to save your selection.
• Press [MENU] button to exit.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
18
Set the Digital Zoom:
Your Stealth Cam can be programmed to have 3 different zoom levels.
• Switch the camera to the ON position.
¾ LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
• Press [UP] button THREE times to enter Zoom setting mode.
• The word ZOOM will be blinking.
• Press [OK] button and the zoom level number will now blink.
• Press the [UP] or [DN] button to select the desired zoom level
setting 1 (1X Normal) /2 (2X Zoom) / 4 (4X Zoom).
• Press [OK] to confirm your selection
• Press [MENU] button to exit.
NOTE: The use of the digital zoom feature may degrade image &
video quality, as this tells the camera to focus on a specific are of the
image and increase its size. This will cause dithering of the image.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
19
Setting the Time Out Mode:
Your Stealth Cam can be programmed to set the amount of time in
seconds or minutes the camera will sleep between PIR triggers.
• Switch the camera to the ON position.
¾ LCD screen will display the camera status screen.
• Press the [MENU] button once within 30 seconds to enter the
programming mode.
• Press [UP] button FOUR times to enter Time Out setting mode.
• The word TIME OUT will be blinking.
• Press [OK] button and the SECONDS digits will be blinking.
• Press [UP] or [DN] button to increase or decrease the time value
in seconds from 0 to 59 seconds in 1 second increments.
• Press [OK] to save the seconds setting and the MINUTES digits will
be blinking.
• Press [UP] or [DN] button to increase or decrease the time value
in minutes from 0 to 59 minutes in 1 minute increments.
• Press [OK] to save the minutes setting.
• You’ll then see the word ‐ TIME ‐ blinking.
• Press [MENU] button to exit.
WWW.STEALTHCAM.COM
Toll Free 877-269-8490
20
Setting the IR emitter selection:
This camera is equipped with an IR selection toggle switch. Make sure
camera is in the OFF position before making any changes.
• 38 IR – Full illumination. Ideal for subject matter beyond 20ft.
• 30 IR – Reduced illumination. Good for use when subject is 20ft or
closer.
Setting the Time and Date:
Your Stealth Cam uses the 24hr military time format.
• Switch the camera to the ON position.
¾ LCD screen will display the camera status screen.
• Press the [MENU] button within 30 seconds to enter the
programming mode.
• Press [DOWN] button TWO times to enter Time and Date mode.
• The word TIME will be blinking.
• Press [OK] to enter Minute setting first.
• The MINUTE digits will be blinking.
• Press [UP] or [DN] to increase or decrease the minute value (00 ‐ 59).
• Press [OK] to save your selection and enter Hour setting.
• The HOUR digits will be blinking.
• Press [UP] or [DN] to increase or decrease the hour value (00 – 23).
• Press [OK] to save your selection and enter Month setting.
• The Month digits will be blinking.