SWIT Electronics S-1090H User Manual
Page 9
4. TALLY Light Operation
There are front and rear TALLY lights on the monitor, which can display RED, GREEN and YELLOW signals.
The TALLY light controlling port is the DB-9 socket at the rear panel, and terminal description is as follows:
The RED light is on when connecting the terminal “R” with “GND”, and goes out when disconnecting.
The GREEN light is on when connecting the terminal “G” with “GND”, and goes out when disconnecting.
The YELLOW light is on when connecting the terminal “Y” with “GND”, and goes out when disconnecting.
5. Cold Shoe Bracket
The provided monitor bracket supports both cold shoe and screw mount for camera connection.
1. For cold shoe: anticlockwise screw the knob to draw the bolt back, slide the cold shoe mount into camera,
and then clockwise adjust the knob to fasten.
2. For screw mount: clockwise screw the knob to draw the bolt directly into the screw thread of camera till
fastened.
3. Screw the ball head knob into monitors, and lock the ball head.
Terminal
1
2
3
4
5
6
7
8
9
Description
Y
G
R
GND GND GND
① Lock
② Knob
③ Cold shoe mount
④ Screw bolt