SWIT Electronics S-1051H - Manual (Page 5)

2. Panel Instruction
Front view
⑴ POWER: Power on/off
Connect with power cable or mount battery, press the “POWER” and the power indicator is turned on
and after 10 seconds, the monitor will be switched on and get into normal working status. Press the
“POWER” again, the indicator is turned off and monitor is switched off.
Disconnect with power cable or take off the battery if the monitor will not be used for a period of time.
⑵ SOURCE: Input signal selection
Press “SOURCE” and revolve the “OK” to select the input video signal.
⑶ F1: User definable function key 1
⑷ F2: User definable function key 2
⑸ RATIO: 16:9 and 4:3 switch
⑹ DISPLAY: Display current settings
Press “Display” to display safety mark, title and the current input signal information
⑺ MENU: Press to enter Menu
⑻ OK: Select and Apply
Under menu system, revolve “OK” to adjust settings and press to apply; and out of menu system,
directly revolve “OK” to adjust volume.