SWIT Electronics M-1051H User Manual
Page 5
2. Panel Instruction
Front view
⑴ PHONE: Earphone jack, for SDI embedded audio, HDMI embedded audio monitoring
⑵ POWER: Power on/off
Connect with power cable, press the “POWER” and the power indicator is turned on and after 10
seconds, the monitor will be switched on and get into normal working status. Press the “POWER” again,
the indicator is turned off and monitor is switched off.
Disconnect with power cable if the monitor will not be used for a period of time.
⑶ SOURCE: Input signal selection
Press “SOURCE” and revolve the “OK” to select the input video signal.
⑷ F1: User definable function key 1
⑸ F2: User definable function key 2
⑹ RATIO: 16:9 and 4:3 switch
⑺ DISPLAY: Display current settings
Press “Display” to display safety mark, title and the current input signal information
⑻ MENU: Press to enter Menu
⑼ OK: Select and Apply
Under menu system, revolve “OK” to adjust settings and press to apply; and out of menu system,
directly revolve “OK” to adjust volume.
⑽ TALLY Light: Red, Green and Yellow 3-color TALLY indicator