SWIT Electronics S-1221H - Manual (Page 8)

3.5 DISPLAY submenu
The DISPLAY submenu is to select the items to be
displayed on screen when ‘DISPLAY” button is pressed.
Revolve "ENTER" to turn on/off the items:
⑴ INFO: Including Input format, aspect ratio,
underscan/overscan, zoom status
⑵ TITLE: User edited title
⑶ MARKER SEL: Select the scale marker from 4:3,
13:9, 14:9, 15:9, 1.85:1, 2.35:1 and OFF
⑷ SAFE AREA: Select the safe area scale from 80%,
85%, 90%, 95% and OFF.
⑸ MARKER CLR: Select the color of markers from WHITE, RED, GREEN, BLUE, BLACK and GRAY.
3.6 F KEY submenu
The F KEY Settings Submenu is to define Function Key F1, F2, F3 and F4. The available function items are:
01- RATIO: Aspect ratio 16:9 / 4:3 switch
02- SCAN: Underscan / Overscan switch
03- ZOOM: Picture Zoom-in
04- B/W: Color / Black & white switch
05- BLUE ONLY: Blue only mode switch on/off
06- ZEBRA: Zebra over exposure switch on/off
07- TIMECODE: SDI timecode display switch on/off
08- AUDIO BAR: Audio meter display switch on/off
09- FOCUS: Peaking focus assist switch on/off
10- FLIP: Image flip
11- COLOR TEMP: Adjust color temperature
12- KEY LED: Keyboard backlight switch on/off
3.7 COLOR submenu
The color submenu is to change the color temperature
settings. User can select color temperature as 6500K
、
5600K 、9300K, or define color temperature by RGB
GAIN and RGB BIAS.
⑴ COLOR TEMP: 6500K, 5600K, 9300K, USER1,
USER2, USER3
⑵ R GAIN: 0-255 value adjustment
⑶ G GAIN: 0-255 value adjustment
⑷ B GAIN: 0-255 value adjustment
⑸ R BIAS: 0-255 value adjustment
⑹ G BIAS: 0-255 value adjustment
⑺ B BIAS: 0-255 value adjustment
Remark: RGB GAIN and RGB BIAS settings are only available when “Color temp” is set as USER1/2/3
4. TALLY Light Operation
The front TALLY light can display 3 colors: RED, GREEN and YELLOW. The TALLY light controlling port is the
DB-9 socket at the rear panel, and terminal description is as follows:
The RED light is on when connecting the terminal “R” with “GND”, and goes out
when disconnecting.
The GREEN light is on when connecting the terminal “G” with “GND”, and goes
out when disconnecting.
The YELLOW light is on when connecting the terminal “Y” with “GND”, and goes out when disconnecting.
Terminal 1 2 3 4 5 6 7 8 9
Description Y G R GND