tekmar 083 Duct Sensor - Manual

1 of 4 © 2007 D 083 - 05/07
- Data Brochure
Duct Sensor 083
D 083
05/07
The tekmar Duct Sensor 083 is designed to measure the average temperature of the air
stream in a heating, cooling, or ventilation duct. The 083 has a 6” (150 mm) long probe
connected to a 2” x 4” electrical box for easy wiring.
Installing the Sensor
The Duct Sensor 083 probe should be located in the middle of the air stream in order to
measure the average temperature of the duct. Drill a 3/8” (10 mm) hole in the duct and
place the probe through the hole.
Foam ring
18 AWG or
similar wire
drill 3/8” (10 mm) diameter
hole in duct
Ensure that the foam ring on the electrical box around the probe fits tight against the
duct.