tekmar 400 House Control Installation - Manual (Page 20)

© 2013 400_D - 09/13 20 of 32
Item Field Range Description
On or Off
Default = Off
USER TEST TESTING
Begins the test routine which tests the main control’s functions.
See the Testing the Control section for more details. Use the
up button to turn the User Test On.
On or Off
Default = Off
MAX HEAT TESTING
When selected, control operates the system up to maximum set
temperatures. Will operate up to 24 hours, or can be manually
turned Off. See Max Heat in the Testing the Control section
for more details.
400
J12 04B
TYPE AND SOFTWARE VERSION
Displays the type number of the product, followed by the current
software version beneath.
INST (Installer)
or USER
Default = INST
ACCESS LEVEL
Selects the Access Level of the control, which determines the
Menu items available. USER provides the most limited level of
access and shows the fewest possible items.
When set to USER, all thermostats are locked and the number
of thermostat settings available are reduced.
OFF, SEL
Default = Off
FACTORY DEFAULTS
Loads the factory default settings. Hold the Up and Down
buttons for 1 second until SEL is shown.
0 to 24 devices
BOIL DEVICES
Displays the number of devices on the Boil bus (Water
Temperature). This is made up of thermostats connected to
the House Control and to the Boil Expansion terminals.
See Troubleshooting
Guide
HISTORY - 1 THROUGH 5
Displays a history of any past errors that have occurred on the
system. Will clear after 30 days, or press Up and Down buttons
for 1 second to manually clear. The last 5 history items will
display if present.
TO
O
L
B
O
X
M
E
N
U
After the last item, the control returns to the first item in the menu.
The Toolbox Menu is a location for system information and
Test functions. If any errors are present on the system, they
will be located at the beginning of this menu.
Toolbox Menu (1 of 1)