tekmar 545 Thermostat Installation - Manual (Page 10)

© 2008 D 545 - 07/08 10 of 40
Item Field Range Access Description
HEAT, COOL
Default = COOL
ADV
PRIORITY HEATING OR COOLING SECTION G
Select whether heating has priority or cooling has
priority.
Note: This item is only available when the Cool Stage
is set to 1.
NONE, 1, 2
Default = 1
INST
ADV
FAN MODE SECTION I
Select the operation of the Fan 1 output.
OFF, ON
Default = OFF
ADV
FAN 1 VENTILATION SECTION I
Select whether Fan 1 output operates to provide
ventilation.
Note: This item is only available when the Fan Mode
is set to None.
OFF, 1 to 60 min
Default = OFF
ADV
VENTILATION PRE-VENT SECTION I
Select how long the ventilation operates continuously
prior to the Wake or Occupied events.
Note: This item is only available when the Fan Mode
is set to None and F1 Vent is set to On.
AUTO, OFF,
10% to 90%, ON
Default = AUTO
LTD
USER
INST
ADV
FAN OPERATION SECTION I
The minimum percentage of time the ventilation fan
operates during each event.
Auto operates with heat or cool.
On operates continuously.
% sets a minimum On time for each cycle.
Note: This item is only available when the Fan Mode
is set to 1 or F1 Vent is set to On.
Wake
UnOccupied
Occupied
Sleep
OFF, 70 to 180°F
(OFF, 21.0 to 82.0°C)
Default = 110°F
(43.0°C)
ADV
HEAT COIL MINIMUM SECTION I
Set the minimum coil temperature before turning on
the fan for heating. This allows the fan coil to heat up
and prevents the fan from blowing cold air.
Note: This item is only available when H1 or H2
Terminal is set to Coil, Sensor 2 is set to Coil and
Fan Mode is set to 2.
40 to 80°F, OFF
(4.5 to 26.5°C, OFF)
Default = OFF
ADV
COOL COIL MAXIMUM SECTION I
Set the maximum coil temperature before turning on
the fan for cooling. This allows the fan coil to cool off
and prevents the fan from blowing hot air.
Note: This item is only available when Cool Stage
is set to 1, Sensor 2 is set to Coil and Fan Mode is
set to 1 or 2.
Adjust Menu (5 of 7)
Continued on next page.
ADJUS
T MENU