Important safety information – tekmar 654 Snow Melting Control Installation User Manual
Page 3
3
of
44
©
2013 654_D
-
06/13
The installer must ensure that this control and its wiring are
isolated and/or shielded from strong sources of electromagnetic
noise. Conversely, this Class B digital apparatus complies
with Part 15 of the FCC Rules and meets all requirements of
the Canadian Interference-Causing Equipment Regulations.
However, if this control does cause harmful interference to
radio or television reception, which is determined by turning
the control off and on, the user is encouraged to try to correct
the interference by re-orientating or relocating the receiving
antenna, relocating the receiver with respect to this control,
and/or connecting the control to a different circuit from that
to which the receiver is connected.
Cet appareil numérique de la classe B respecte toutes les exi-
gences du Règlement sur le matériel brouilleur du Canada.
Radio Frequency Interference
To avoid serious personal injury and damage to the equipment:
It is the installers responsibility to ensure that this control
is safely installed according to all applicable codes and
standards.
Improper installation and operation of this control could result
in damage to the equipment and possibly even personal
injury or death.
This electronic control is not intended for use as a primary
limit control. Other controls that are intended and certified
as safety limits must be placed into the control circuit.
Do not attempt to service the control. There are no user
serviceable parts inside the control. Attempting to do so
voids warranty.
•
•
•
•
Important Safety Information
It is your responsibility to ensure that this control is safely installed according to all applicable codes and standards.
tekmar is not responsible for damages resulting from improper installation and/or maintenance.
Read Manual and all product labels
BEFORE using the equipment. Do not
use unless you know the safe and proper
operation of this equipment.
Keep this Manual available for easy
access by all users.
Replacement Manuals are available at
tekmarControls.com
•
•
•
Disconnect all power before opening
the control.
•