tekmar 481 User Switch Installation - Manual (Page 10)

© 2009 D 481 - 07/09 10 of 12
Application Example:
A User Switch is installed in the garage and another User Switch is installed in
the master bedroom.
The User Switch’s exterior can be cleaned using a damp cloth. Moisten the cloth
with water and wring out prior to wiping the device. Do not use solvents or cleaning
solutions.
Cleaning the User Switch
0.44”
(11.0 mm) 0.62”
(15.8 mm)
0.62” (15.7 mm)
1.03” (26.2 mm)
0.31”
(7.9 mm)
0.10”
(2.6 mm)
0.10”
(2.4 mm)
0.10”
(2.4 mm)
1) Download the User Switch Data Brochure PDF file D481.pdf from the
Downloadable Literature Section on our tekmar website:
http://www.tekmarcontrols.com to your computer.
2) Click on the grey area (text field) and type the label description.
3) Print this page onto transparency film. Ensure the correct transparency film type
is used for either laser printers or bubble-jet printers.
User Button Label Template
User Switches with the same functionality at different locations
There may be applications where there are two or more User Switches installed
in a building. Each of the User Switch User Buttons can be programmed with the
same functionality. When an User Button is pressed, User Buttons with the same
functionality will all light green at the same time.