CDA BVB4 User Manual
Page 4
IC43
6
4.
DISPOSAL OF HOUSEHOLD APPLIANCES
Under the European directive 2002/96/EC on waste from electrical and electronic equipment (WEEE),
household appliances may not be disposed of at normal landfi ll sites. Old appliances must be collected separately to optimise the recovery and recycling of their
materials and to prevent potential harm to health and the environment. The symbol of a bin with a cross is affi xed on all products, to remind users that
they must dispose of the product separately. For further information on how to dispose of household appliances, users should contact a public authority or their
dealers.
CE This appliance has been manufactured in compliance with EN 60204 –1 ; and conforms to the
directives: -98/37/EG -89/336/EWG EMV -73/23/ EWG
5.
INSTALLING THE APPLIANCE
Make sure the beer dispenser can fi t into the cabinet (fi g 2).
1.
Drill a Ø 5 cm hole at the back of the cabinet base (fi g. 2) to pass the beer fl ow line through (fi g. 2).
2.
Position the dispenser, after connecting the mains lead and passing the beer fl ow line “G” (fi g. 2) through the cabinet base (where the keg is stored) (fi g 2).
3.
Secure the dispenser to the base using the 2 screws provided, inserted in the two holes in the drip tray storage area.
4.
Fit the tray and rack.
5.
Fit the control unit on the side of the cabinet, placing it against the base and secure with the 4 screws provided (fi g. 2).
6.
Insert the adaptor (same type as the dispense head) in the washing attachment.
7.
Carefully connect fi tting “H” (fi g. 1), positioned at the end of the beer fl ow line “G” (fi g. 1) to the beer outlet connection of the dispense head “I” (fi g. 1).
8.
Carefully connect fi tting “K” (fi g. 1) , positioned at the end of the CO² fl ow line “M” (fi g. 1) to the CO² inlet connection of the dispense head “I” (fi g. 1).
9.
Fit the dispense head on the keg attachment and secure lowering the dispense head lever and making sure it is fi tted properly to avoid beer and CO² leaks.
Click to secure.
Always check with your keg retailer which system is compatible with the keg you require (Sankey S-System, Grundy G-System).
20
2
0
°C
°F
30
40
5
0
10
°C
°F
40
60
80 10
0
1
20
0
0,5
1
EN 562
bar
MICR
O
MAT
IC
2
3
4
5
6
50
100
150
200
250
20
bar
MICR
O
MAT
IC
E 56
2
N
MICR
O MA
TIC
550
400
568
595
350
19
458
450
445
G
(fi g. 2)