Teradek Brik User Manual
Br k br k, Network connection, Power & connect
Stream Joystick:
,
: Selects options from streaming/recording prompts
●
(button press)
: Returns to main status screen, start/stop recordings and broadcasts
Menu Joystick:
▲
,
▼
: Select menu items, change status screen on main display, select characters
: Back, move to higher menu level
,
●
(button press)
: Confirm selection, open selected menu
▲ ▲
▲
▲
NETWORK CONNECTION
M:
Video Input
N:
Status
O:
Broadcast/Record
P:
Fault/Error
Q:
Stream Joystick
R:
Menu Joystick
Connect power via V−lock battery.
(C)
and video input to
(E)
.
Attach antennas
(A)
via the threaded RP−SMA connectors.
Move power switch to the
ON
position
(D)
.
Mount to back of camera.
Brik defaults to Master mode, which will create and
advertise its own network name (SSID). Your computer,
decoder, or mobile device connects directly to Brik, with
no additional network equipment required.
1. On your computer or iOS device, open your
wireless networking utility.
2. Choose your Brik from the list of WiFi devices
in your area and connect to that network.
In Infrastructure mode, Brik connects to an existing network via a wireless access point. Infrastructure mode
allows Brik to communicate with all devices on the network and is required for streaming to the Internet.
Wireless range can be greatly improved by using a wireless access point.
Connecting Brik to an existing wireless network:
POWER & CONNECT
1
2
1
3
2
OPTION A:
MASTER MODE:
Connect one other device to Brik.
OPTION B:
INfRASTRuCTuRE MODE:
Add Brik to an existing network.
WiFi CONNECTION ON MAC/PC OR iPAD
1. Enter the main menu by pressing
▲
or
●
.
Select
Network Setup
with
▼
and enter the
menu with
▲
.
2. Select
Configure
.
6. If prompted, enter your network password. Choose
characters with
▲
and
▼
, choose the position
with
▲
and
▲
, and confirm with
●
. To cancel, press
●
.
4. From the WiFi Configuration menu, choose
Scan
.
3. Select Mode, and then choose
Infrastructure
.
The Wireless mode will be set.
8. Once configured, you can view the network status
by selecting
Status
from the
Network Setup
menu.
7. Choose Yes to Apply the new Network settings.
NEED MORE HELP?
1. Support forum: http://forum.teradek.com → Contains tips, information and all the latest firmware & software updates.
2. Training videos: http://www.teradek.com/training
TERADEK SuPPORT STAff:
support
@teradek.com or call 888−941−2111 ext2 (Mon−fri 9am to 6pm PST)
R
M
O
P
N
bR k
bR
k
Pantone 144 (BRIK)
I
G
J
D
H
B
E
A:
Wireless Antenna
B:
SD Card
C:
V
-lock
D:
Power Switch (bottom of Brik)
E:
Video Input (SDI)
f:
SDI Loop Outputs
G:
DC Outputs
H:
Line/MIC Audio Input
I:
Headphone Audio Output
J:
USB port
K:
P−Tap
L:
Ethernet and AUX, 4−pin Lemo
C
A
F
Q
5. Select your preferred network, (the
icon
indicates a secured network), and the number
is the signal strength.
SDI
WiFi antenna
K
Power:
Internal battery may be recharged with a P−Tap
(K)
when the device is not in use
L
D