Teradek Clip - Manual

A: Wireless Antenna
B: Power Input
C: Micro HDMI Video Input
D: Mode Button
E: Auxiliary Connector
F: Stream Status Indicator
G: Client Status Indicator
H: Access Point Status Indicator
I: Reset Button
J: WiFi Status Indicator
K: Encoder Status Indicator
L: Video Status Indicator
A
B
C
D
E
F G H I J K L
LED Description Off Red / Yellow Blue
Stream Not streaming Client not responding Streaming
Client No clients N/A AP Mode
• Solid: Client(s)
Connected
Infrastructure mode
• Blinking: Connecting
• Solid: Connected
AP (Access Point) N/A Infrastructure Mode AP Mode
WiFi Not configured 2.4GHz 5GHz
Encoder Not encoding Restarting/no host Ready/Encoding
Video No video Video not supported Video sync
GETTING STARTED
1
iOS users − download the
TeraClip app. Connect iPad to Clip’s network.
(WiFi SSID − CLIP−xxxx)
Plug power and video into
Clip. Attach antennas.
1 3
2
Open the TeraClip app.
4
Button Operation
Mode Button
• Hold for 1−2 seconds: Switches stream destination (when multiple
clients are connected).
• Hold for 6−8 seconds: Toggles between AP mode and Infrastructure
mode (if configured).
Reset Button
• Hold for 5 seconds: factory reset.