Teradek Edge - Manual

A: Status LEDs
B: Menu Joystick
C: Stream Joystick
D: WiFi Antennas
E: LAN/WAN
F: Antenna Connectors
G: A/C Input
H: Reset Button
I: SIM Card Slots
Menu Joystick:
▲
,
▼
: Select menu items, select characters
: Back, move to higher menu level
,
● (button press)
: Confirm selection, open selected menu
Stream Joystick:
● (button press)
: Cycle status screens on main display, cancel (back),
switch text entry mode
▲
▲
POWER & CONNECT
1
SPUTNIK SERVER
2
Enter the menu on Edge’s front panel ( ,
●
), select the Sputnik menu,
select Host , and then use the onscreen input to enter your Sputnik
server’s IP address or host name. Select OK to set the value. Please see
the Sputnik set up guide for Sputnik installation information (Available
at http://teradek.com/pages/downloads).
SPECIFY YOUR SPUTNIK SERVER’S ADDRESS
1.
3.
2.
▲
A B C
D
E F
G H I
Attach cellular antennas to the SMA antenna connectors (F) .
Insert compatible SIM cards (I) .
Connect A/C Cable to (G) , Edge turns on automatically when
power is connected.
Attach WiFi antennas if desired to the RP−SMA connectors
labeled 2.4/5Ghz
(D) .
1
3
4
2
CONNECT YOUR ENCODER TO EDGE
Connect Cube to Edge’s wireless network (default Edge
-1234
, where 1234
is replaced with the last four digits of your Edge’s serial number):