Teradek Slice Encoder - Manual (Page 2)

2. Open the Wifi Settings and connect to Slice’s
network (see section 2 for more information).
STREAM
3
Selecting which stream to view:
Changing output format:
OPTION C: DECODER SETUP: Output live video to a monitor or switcher.
OPTION A: STREAM FROM SLICE TO THE INTERNET
1. Enter the menu with ● . Select Decoder Setup .
1. Enter the menu, select Output Setup .
2. Adjust your output resolution and audio settings
in the appropriate menu.
2. Select Automatic .
3. Choose the stream you want to view and confirm the setting when prompted.
OPTION B: LOCAL MONITORING WITH iOS DEVICES AND TERACENTRAL
1. Download TeraCentral from the iTunes App Store.
3. Open the TeraCentral app. You will see your
Slice’s stream listing.
4. Tap the Play button to open your video stream.
(WEB UI LOGIN: username: admin password: admin )
Configure your Slice for Internet streaming on Slice’s Stream Settings page.
1. Launch Slice’s configuration page by clicking Configure in TeraCentral.
2. If the wizard appears, click Skip the Setup Wizard , then log in to Slice’s web UI
(user: admin , password: admin ). Navigate to Video Setup → Stream Settings.
1. Select RTMP as the Stream Mode .
2. Enter the server URL. Depending on your destination
(local server or CDN), this will look something like
rtmp://server.address:1935/live. The URL varies based on your
streaming provider. Check with them or Teradek Support to get
the proper address. Often the server URL is found with FMLE
instructions or in a downloadable XML file.
3. Enter the stream name. Again this varies by platform,
but should be found with the server URL.
4. Select enabled or disabled for auto−start broadcast.
If enabled, Slice will attempt to start a broadcast
whenever it powers up.
1. Under Stream Mode , select Livestream (Live Internet
Streaming) .
2. Enter your Livestream username, password, and
channel short name. Click
Verify Login to check that
Slice can contact Livestream and that your login
information is valid. NOTE: the channel short name
is case sensitive.
3. Click Apply . Start/stop the stream by clicking Start
Broadcast on the Stream Settings page or by pressing
the Stream joystick on Slice.
5. Click Apply . Start/stop the stream by clicking Start Broadcast
on the Stream Settings page or by pressing the Stream joystick on Slice.
6. See the reference guide for additional information.
RTMP streaming:
Livestream