Teradek Sputnik - Manual (Page 9)

Version 2.0 May „12 © Teradek, LLC 2012. All rights reserved.
Page | 9
a. Select „SSH‟ for „Create a new rule.‟
b. Click „Add Rule.‟
c. After adding the rules, the listing on the right should look similar to the following:
d. Click „Apply Rule Changes‟ at the bottom of the Security Group pane.
7 Installing Sputnik (EC2)
Download the Sputnik RPM file. This package contains the Sputnik binaries and configuration files. For
convenience, save the RPM file to the same directory as your permissions file (Creating an Amazon EC2
instance for Sputnik, step 13).
Installing Sputnik requires the use of a terminal program. On Mac this can be found in the „Utilitities‟
folder within Applications:
1. Mac/Linux users -- open a terminal and navigate to the directory where your permissions file is
saved.
a. Replace <pem-file-location> with the path to your permissions file.
$ cd <pem-file-location>
2. Modify the permissions of the .pem file using chmod.
a. Replace <pem-file.pem> with the permissions file name.
$ chmod 400 <pem-file.pem>
3. Using scp, copy the file to your EC2 instance.
a. You will need to use the IP address configured in Creating an Amazon EC2 instance
for Sputnik, steps 16 and 17.