T-Fal All Kettles - Manual (Page 7)

For UK only:
wiring instruction s
Warning: this appliance must be earthed
Important: the wires in this cord are coloured in accordance with the
following codes:
Green and yellow: Earth
Brown: Live
Blue: Neutral.
Connect the Green/Yellow wire to the terminal in the plug marked ”E”
or by the earth symbol or coloured Green or coloured Green and
Yellow. Connect the Brown wire to the terminal in the plug marked ”L”
or coloured Red. Connect the Blue wire to the terminal in the plug
marked ”N” or coloured Black.
A 13 amp fuse should be fitted when the appliance is connected to a
BS 1363A plug. Seek professional advice if unsure of the correct
procedure for the above.
The cord is already fitted with a plug incorporating an appropriate
fuse. If the plug does not fit your mains socket, see paragraph below.
Should you need to replace the fuse in the plug supplied,
an appropriately rated, approved BS 1362 fuse must be used
(refer to wiring instructions for fuse rating).
If the plug supplied does not fit your mains socket, it should be
removed from the mains cord and disposed of safely. The flexible
cord insulation should be stripped back as appropriate and a suitable
alternative plug fitted.
If the plug has external access to the fuse (non rewirable type plug)
please note that the fuse cover is an important part of the plug.
Please ensure that it is always refitted correctly.
Abou t
your factory-fitted plug
N: Blue
or black
E: Green and
yellow or green
L: Brown
or red
Fit correct
fuse(13 amp)
Use cable
gripper
• If you lose this cover,
please do not use the
plug.
You may contact Tefal
UK Limited for a
replacement.
GB