T-Fal Avante Elite Convection - Manual (Page 8)

5
Eng
BAKE/Convection oven function
(the two heating elements operate with temperature control)
To cook all your dishes:
• Place your dishes in the main oven at the desired height.
• Close the door.
Select the temperature:
• Press the “BAKE” button.
• The default temperature of “350°F” will be shown blinking on the
display.
• Press the “+” or “-” buttons to select your temperature. The
temperature can be changed in 25°F increments.
• The display will continue to blink.
Select the cooking time:
• Press the “TIME” button. In so doing, the temperature setting is
entered in the system.
• The default setting of “0:30” (30 minutes) will appear blinking on
the display.
• Adjust the cooking time according to your recipe by pressing
the “+” or “-” buttons.
• Press “START”. The appliance will beep and cooking will start.
• The time will be counted down in one-minute intervals.
• At the end of the cooking time, the appliance will beep three
times and cooking will stop.
• You can stop the cooking at any time by pressing the “STOP”
button.
Clock setting
• Immediately after connecting your oven, “12:00” will appear on
the display.
• Press the “CLOCK” button. The display will begin to blink.
• Adjust the time in steps of one minute by pressing the “+” or
“-” buttons.
• If you press and hold the button for more than 2 seconds, the
time will change more quickly.
• Press the “CLOCK” button to enter the time in the system.
If you do not press the “CLOCK” button, the time will be
entered automatically after 30 seconds.
• To see the time during cooking, press the “CLOCK” button. The
time will be displayed for 5 seconds; the display will then revert
to the countdown.