Select the receive mode exit the setting menu – Canon IMAGECLASS MF3200 User Manual
Page 92
5-2
Rec
e
iv
in
g Fax
e
s
Select the Receive Mode
Exit the Setting Menu
Select receive mode with
[
] or
[
]
, then press [OK].
<FaxOnly>: Answers all calls as faxes.
<AnsMode>: Receives faxes automatically and records
voice messages.
<DRPD>: Distinguishes between fax and voice calls.
<FAX/TEL>: Switches between fax and voice calls
automatically.
<MANUAL>: Does not answer any calls. You have to
manually receive faxes.
NOTE
– For <AnsMode>, make sure an answering
machine is connected to the machine.
– For <DRPD>, subscription to a DRPD
service is required.
Press [Stop/Reset] to return to
standby display.
What if...
● You press [Stop/Reset] to cancel a
job:
The <CANCEL DURING TX/RX?>
message appears. Press [
] to select
<Yes>. The job is canceled, and the
display returns to standby mode.
● The <OUT OF TONER/CHANGE
TONER> message appears:
The toner cartridge is almost empty.
Replace the toner cartridge.
For details on this error message, see
“LCD Messages,” on p. 11-7.
3
4