Canon CR-DGi - Manual (Page 5)

1
1. Introduction
1.1 Overview
This software package is a viewer application specifically for the Canon Non-Mydriatic Retinal Camera CR-DGi
(called “CR-DGi” below). Retinal images captured from the EOS digital camera installed on the CR-DGi are
automatically loaded, and special CR-DGi image processing is performed to display the images. If necessary, the
study information is recorded together with the image and saved to a folder created for each capture date.
 Images captured using the CR-DGi are automatically received and displayed.
 Exif and RAW images can be captured.
 Any size image set by the EOS digital camera can be captured.
 Images can be saved in JPEG, BMP, and RAW formats.
 Study information is saved inside the JPEG file.
 Images can be magnified and reduced in size, and the brightness and contrast can be adjusted.
 Images can be printed with the study information.
 Images can be managed using dated folders.
 Images can be managed by the counter number for each date.
 Images can be compared.
1.2 Operating Environment
 OS:
Windows 2000 Professional or Windows XP Professional
 CPU:
Pentium III 600 MHz or faster (Pentium 4 1.6 GHz or faster is recommended)
 RAM:
256 MB or more (512 MB recommended)
 Hard disk:
10 GB or more recommended
 Monitor:
1024 x 768 dots or higher resolution, 24bit color or higher
 CD-ROM drive
Required for installation
 Printer
Required if using the printing function
 Digital camera
EOS-D60/10D
 Retinal camera
CR-DGi