Install rear suspension – Trail Master Suspension TM3415-20013 JEEP WRANGLER (TJ) 1.5 POLY SPACER KIT User Manual
Page 6
6
6. Unbolt the rear brake line brackets from the ve-
hicle.
7. Lower the rear axle enough to remove the coil
springs from the rear spring pockets. Save the
factory isolators for re-use. Be sure to support
the axle while the springs and shocks are re-
moved.
8. Remove the rear bump stops and unbolt the
bump stop-mounting cups.
Install Rear Suspension
1. Install the rear poly spacers (15-11515) and iso-
lator over the bump stop mount. Reinstall the
bump stop cup using the previously removed
OE hardware.
2. Install the OE bump stop to the mounting cup.
3. Reinstall the rear coil springs and isolator. Jack
up the rear axle making sure the rear coil spring
seats properly on the lower spring perch.
Rear
Bump Stop
Mounting
Cup
Rear
Bump Stop
Mount
Rear
Bump Stop
Mounting
Cup
Rear
Bump Stop
Mount
15-11515
Rear Poly
Spacer
Rear
Bump Stop
Mounting
Cup
OE Bump
Stop
Rear
Coil
Spring