Trail Master Suspension TM3330-40013 JEEP WRANGLER 4 DOOR (JK) 3 SPACER KIT - Manual (Page 7)

7
2. Secure the rear track bar drop bracket (82-
TM20011) to the frame using the (1) supplied
14mm X 75mm bolt, 12mm X 30mm bolt and
hardware.
3. Torque the 14mm track bar drop hardware ac-
cording to the torque chart on page 9 and the
OE bolt to 125 ft./lbs.
4. Install the coil spacer mounting nut (82-
TM20009) on top of the coil bucket.
5. Install the rear coil spacer (82-TM30004) into
the upper coil bucket. Secure the rear coil
spacer to the mounting nut using the 12mm X
75mm fully threaded bolt and hardware.
6. Reinstall the coil springs and the previously re-
moved OE isolators into their respective upper
and lower spring perches.
7. Raise the rear differential and make sure that
the coil springs are in their saddles.
82-TM20011
Track Bar
Drop Bracket
35-TM30010
Sleeve
Rear Upper
Coil Pocket
82-TM20009
Mounting
Nut
12mm X
75mm Fully
Threaded
Bolt
82-TM30004
Rear Spring
Spacer
OE Track
Bar Bolt
12mm X
30mm Bolt
82-TM20011
Track Bar
Drop Bracket
OE Track
Bar
14mm X
75mm Bolt