Trebor SS95-X Surge Suppressor - Manual (Page 3)

SS95 SURGE OPERATION / MAINTENANCE MANUAL PAGE 3
1 INSTALLATION
1.1 UNPACKING
After unpacking, the Surge Suppressor should be checked for any damage that
may have occurred during shipment. Damage should be reported to the carrier
immediately.
The following items should be included within the shipping container:
Qty Item Description
1 SS95-X SS95 Surge Suppressor
1 MSS95-X Operation/Maintenance Manual
1.2 LOCATING / MOUNTING SURGE
• Run 1/8 bleed line to drain. In the event of a diaphragm failure fluid may flow
through tube to drain.
• Connect air supply using 3/8” or larger air line. Air supply to Surge
Suppressor must be equal to or greater than pump supply pressure.
NOTE: When connecting the SS95-X to an externally controlled pump, do not
connect the SS95-X air supply via a tee from the pump. Connect to a separate
continuous supply.