Triton TCB 100 - Manual (Page 2)

2
GB
CONTENTS
SPECIFICATIONS
Part no: TCB100
Suits: Most circular saws (185mm - 235mm)
Cuts: Rip, mitre, crosscut,
Rip capacity: 0 - 450mm
Crosscut capacity: Up to 450mm wide
Standing size: 980mm x 380mm x 1040mm approx
Folded size: 900mm x 540mm x 300mm approx
Standard features: Rip fence with 0-450mm capacity, See-through guard, anti-
kickback finger & dust extraction port, Intergrated pushstick &
side pressure fingers
Optional Accessory Range: Bevel ripping guide, dust collection bucket, dust bag
Protect your hearing
Always use proper hearing protection when tool noise exceeds 85dB.
Thank you for purchasing this Triton tool. These instructions contain information necessary
for safe and effective operation of this product.
This product has a number of unique features. Even if you are familiar with this Workcentre,
please read this manual to make sure you get the full benefit of its unique design.
Keep this manual close to hand and ensure all users of this tool have read and fully understood the instructions.
Contents / Specifications / Symbols
Specifications 2
Symbols 2
Parts List 3
Safety 4
Assembly 5
Warranty 13
SYMBOLS
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authority or retailer for ecycling advice.
Always wear ear, eye and respiratory
protection.
Double insulated for additional protection.
Instruction warning.
Do not use before viewing and
understanding the full operating
instructions