Cerwin-Vega CV-900 - Manual (Page 2)

IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions – All the safety and operating instructions should be read before
this product is operated.
2. Retain Instructions – The safety and operating instructions should be retained for
future reference.
3. Heed Warnings – All warnings on the appliance and in the operating instructions
should be adhered to.
4. Follow Instructions – All operating and use instructions should be followed.
5. Do not use this amplifier near water. The amplifier should not be used near water
or moisture or dripping or splashing — for example, in a wet basement, in the
rain, or near a swimming pool. Objects that contain liquids, such as vases, shall
not be placed on the ampllifier.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Pleaase install in a well ventilated
environment.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or gounding plug. A polorized
plug has two lnades with one wider than the other. A grounding plug has two
blades and third prong. The wide blasde or the third prong is provided for safety.
If the provided plug does not fit into your outllet, consult an electician for
replacement of the obsolete outlet.
10. WARNING: The mains plug or amplifier power inlet is used as a disconnet
device, the disconnect device shall remain readily operable. Protect the power
cord from being walkied on or pinched particularly at theplugs, conenience
receptacles, and at the point where they exit from the amplifier.
11. Use only attachments/accessories specified by the manufacturer.
12. Use this amplifier only withcarts and rack equipment rated
for this type of equipment. When a cart or rack is used use
caution when moving to avoid injury from a tip-over.
13. Unplug the amplifier during lightening storms or when
unused for longperiods of time.
14. Refer all servicing to qualified personnel. Servicing is required when the
amplifier has been damaged in any way, such as the power cord is damaged,
objects have fallen into the amplifier, the amplifier has been exposed to rain or
moisture, has been dropped or does not operate normally.
16.This amplifier should only be operated from the type of power source indicated
on the rating label. If you are not sure of the type of power coming from your wall
socket, consult your product dealer or local power company.
!7. WARNING: to prevent hazardous electrical shcok do not touch the conductive
parts of the out put terminals. The external wiring connected to these terminals
requires installation by a qualified technician.
18. This product is in compliance with EU WEEEE regulations.
Disposal of end of life of product shoud not be treated as
municipal waste. Please refer to your local regulations for
instructions on proper disposal of this product.
CAUTION: To reduce the risk of electric shock, do not remove any
cover. No user-serviceable parts inside. Refer servicing to
qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the user
to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
CAUTION: To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted to prevent blade exposure.
"Protective earthing terminal.The amplifier should be connected to a mains socket outlet with a
protective grounding connection terminal. The amplifier should be connected to a mains socket
outlet with a proper gounding connection for safe operation.
Caution Hot Surface! Heat danger. Please don’t touch the area because a high temperature
danger may exist. Use caution when touching surfaces makred with this logo as they may become
hot during extend use.
This lightening flash is intended to alert the user to the presense of non-insulated “dangerous
voltage” on the output terminals that may be of sufficent magnitude to constitute a risk of electric
shock. The external wiring connected to the terminals requires installation by an instructed person or
the used of ready -made leads or cords. of