Tweco 50 CutMaster - Manual (Page 12)

INTRODUCTION 2-2 Manual 0-2805
5. Weight
52 lbs (23.6 kg)
Weight includes Power Supply with Input Cable (and
plug, on 208 / 230V units), Work Lead, and Torch &
Leads.
6. Overall Dimensions (incl. handles)
Length: 22-1/2 inches (572 mm)
Width: 10-3/4 inches (273 mm)
Height: 16-3/8 inches (416 mm)
7. Gas Filter / Regulator Assembly Specifications
The following specifications apply to the standard Gas
Filter / Regulator Assembly only:
• Operating Pressure (Output): 70 psi (4.8 bar)
• Maximum input gas pressure: 125 psi (8.6 bar)
• Filter: Particulate Type Filter (to 20 microns)
2.04 Power Supply Options and
Accessories
The following options and accessories are available for
this power supply. Refer to Section 6, Parts Lists, for
catalog numbers and ordering information.
A. Single - Stage Air Filter Kit
A single - stage air filter for use on compressed air
shop systems. Highly effective at removing moisture
and particulate matter from the air stream to at least
0.85 microns.
B. Two - Stage Air Filter Kit
This two - stage air filter is for use on compressed air
shop systems. Filter removes moisture and contami-
nants to at least 5 microns. The filter assembly is pre
- assembled at the factory and need only be attached
to the power supply.
C. Extended Work Cable with Clamp
As an alternative to the standard 20 ft (6.1 m) work
cable & clamp on the power supply, a 50 ft (15.2 m)
work cable with clamp is available.
D. Wheel Kit
A kit with easy - rolling wheels, for maximum port-
ability for the power supply.
E. Multi - Purpose Cart
Rugged steel cart on easy - rolling rear wheels and
front - mounted swivel casters. Provides maximum
mobility for the power supply and can also serve as
a display cart. Top shelf is 12 " (305 mm) x 20 (508
mm). Steel handle is 30" (762 mm) high.