Tweco 201 ts Thermal Arc - Manual (Page 12)

SAFE INSTRUCTION THERMAL ARC 201 TS
General Information 1-6 Manual 0-5149
1.03 Declaration of conformity
Manufacturer: Thermadyne Corporation
Address: 82 Benning Street
West Lebanon, New Hampshire 03784
USA
The equipment described in this manual conforms to all applicable aspects and regulations of the ‘Low
Voltage Directive’ (European Council Directive 73/23/EEC as amended by Council Directive 93/68/EEC) and
to the National legislation for the enforcement of this Directive.
The equipment described in this manual conforms to all applicable aspects and regulations of the “EMC
Directive” (European Council Directive 89/336/EEC) and to the National legislation for the enforcement of
this Directive.
Serial numbers are unique with each individual piece of equipment and details description, parts used to
manufacture a unit and date of manufacture.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements. Among
them are:
• CENELEC EN50199 EMC Product Standard for Arc Welding Equipment.
• ISO/IEC 60974-1 (BS 638-PT10) (EN 60974-1) (EN50192) (EN50078) applicable to welding equipment
and associated accessories.
• For environments with increased hazard of electrical shock, Power Supplies bearing the S mark
conform to EN50192 when used in conjunction with hand torches with exposed cutting tips, if
equipped with properly installed standoff guides.
• Extensive product design verification is conducted at the manufacturing facility as part of the routine
design and manufacturing process. This is to ensure the product is safe, when used according to
instructions in this manual and related industry standards, and performs as specified. Rigorous testing
is incorporated into the manufacturing process to ensure the manufactured product meets or exceeds
all design specifications.
!
WarninG
This equipment does not comply with IEC 61000-3-12. If it is connected to a public low voltage
system, it is the responsibility of the installer or user of the equipment to ensure, by consultation
with the distribution network operator if necessary, that the equipment may be connected.
Thermadyne has been manufacturing products for more than 30 years, and will continue to achieve
excellence in our area of manufacture.
Manufacturers responsible representative:
Steve Ward
Operations Director
Thermadyne Europe
Europa Building
Chorley N Industrial Park
Chorley, Lancashire,
England PR6 7BX