Lie tig and hf tig programming modes cont – Tweco 186 AC/DC Thermal Arc User Manual
Page 11
Advertising
LiE TIG and HF TIG Programming Modes Cont.
Slide 11
•
WAE BALANCE is used for aluminum welding in AC HF TIG or AC LIFT TIG mode
•
It is used to set the raYo of penetraYon to cleaning acYon for the AC TIG welding
arc.
•
Maximum weld penetraYon is achieved when the WAE BALANCE is set to 10%.
•
Maximum cleaning of heavily oxidized aluminum or magnesium alloys is achieved
when the WAE BALANCE is set to 65%.
Advertising