Tweco PWH-M 2A - Manual (Page 26)

Service 4-5 Manual 0-2005
Figure 4-C Leads Fitting Replacement
Cut hose here
Pull hose back approx. 4" to 6"
and clamp here.
Cut here
Insert wire to here.
Crimp here first.
Crimp here last. After crimping release clamps.
Push hose on fitting past this gland.
Crimp ferrule.
TORCH END CONSOLE END
Cut hose here
Pull hose back approx. 4" to 6"
and clamp.
Cut here.
Insert wire to here.
Crimp here first.
Crimp here last. After crimping release clamps.
Push hose up against shoulder of ferrule.
Crimp ferrule.