Installation/setup transmig 250i – Tweco 250i Transmig Inverter User Manual
Page 55
Advertising
INSTALLATION/SETUP
TRANSMIG 250i
Manual 0-5187
3-37 INSTALLATION/SETUP
4. Set the Weld Current Control Knob to the desired
amperage.
5. Install a stick electrode in the electrode holder.
6. You are now ready to begin Stick Welding.
NOTE
Gently strike the electrode on the work
piece to generate a welding arc, and slowly
move along the work piece while holding a
consistent arc length above base metal.
Advertising