Tweco VS212 Wire Feeder - Manual (Page 12)

TRANSMIG VS 212
SAFETY INSTRUCTIONS 1-6 Manual No. 0-4949
1.03 DECLARATION OF CONFORMITY
Manufacturer: CIGWELD
Address: 71 Gower St, Preston
Victoria 3072
Australia
Description of equipment: Welding Equipment (GMAW, MMAW, GTAW, and CAG). Including, but not limited to
CIGWELD TRANSMIG 500SP, 400SP, 320SP, VS212 Stealth and associated accessories.
Serial numbers are unique with each individual piece of equipment and details description, parts
used to manufacture a unit and date of manufacture.
The equipment conforms to all applicable aspects and regulations of the ‘Low Voltage Directive’ (Directive
73/23/EU, as recently changed in Directive 93/68/EU and to the National legislation for the enforcement of the
Directive.
National Standard and Technical Specifications
The product is designed and manufactured to a number of standards and technical requirements among them
are:
• AS/NZS 3652-(EMC Directive EN50199) applicable to arc welding equipment - generic emissions and
regulations.
• EN60974-1 applicable to welding equipment and associated accessories.
• AS60974.1 applicable to welding equipment and associated accessories.
Extensive product design verification is conducted at the manufacturing facility as part of the routine design
and manufacturing process, to ensure the product is safe and performs as specified. Rigorous testing is
incorporated into the manufacturing process to ensure the manufactured product meets or exceeds all design
specifications.
CIGWELD has been manufacturing and merchandising an extensive equipment range with superior perfor-
mance, ultra safe operation and world class quality for more than 30 years and will continue to achieve
excellence.