Removing slot dividers – Cisco 3800 Series User Manual
Page 88
Advertising
Installing and Removing Slot Dividers
58
Installing Network Modules in Cisco 3800 Series Routers
OL-5973-01
Removing Slot Dividers
Note
The network module slots on both sides of a slot divider must be empty of network modules and slot
adapters before you remove the slot divider.
To remove slot dividers from network module slots, follow these steps:
Step 1
Using a number 1 Phillips screwdriver, loosen the slot divider attachment screw.
Step 2
Pull the slot divider straight out of the network module slot.
Tip
Save the slot divider for future use.
Advertising