Tweco 9-9436 User Manual
Page 2
April 4, 2006
2
Manual 0-4743 Rev. AA
3. Connect the gas supply lines and the control cable con-
nector from the Gas Control Module to the Valve Kit as
shown. Hold the check valves stationary while at-
taching the gas lines.
Control Cable
Plasma Gas Inlet
Shield Gas Inlet
Preflow Gas Inlet
Water Inlet
Art # A-07028
Operation
Operation of the Torch Valve is controlled by the Gas Con-
trol Module. The Torch Valve does not require any adjust-
ment or calibration.
Control Connector Pinout Diagram
3: Ground
9: To SV15 (Bottom)
5: To SV14 (Top)
4: To SV16 (Bottom)
1
2: To SV16 (Top)
6: To SV14 (Bottom)
10
13
14
11
12
8: To SV15 (Top)
Art # A-07426
7
NOTE
Every effort has been made to provide complete
and accurate information in this manual. How-
ever, the publisher does not assume and hereby
disclaims any liability to any party for any loss
or damage caused by errors or omissions in
this Manual, whether such errors result from
negligence, accident, or any other cause.