Cabletron Systems 6A000/ZX-250 - Manual (Page 205)

SmartCell 6A000/ZX-250 Reference Manual 2-181
Console Commands
Detailed Report ( </d> )
switch_prompt # show svc /d
PortNumber(ALL) :
CrossConnectId(ALL) :
Show cross-connection in Detailed Mode
============================================================================
cross-connect Id : 4654
Connection Type : PTP
Low Port : B4(CPU)
Low VPI : 0
Low VCI : 52
High Port : B4(CPU)
High VPI : 0
High VCI : 53
Administrative Status : UP
Low to High Operational Status : UP
High to Low Operational Status : UP
Low to High Last Change(In 100ths of a sec since last reboot): 1117917
High to Low Last Change(In 100ths of a sec since last reboot): 1117917
Forward Traffic Type : UBR
Forward Bandwidth Allocated in Kb/s : 28
Forward Priority Queue : LOW
Fwd Early Packet Discard(For Lower Threshold of Congestion) : Enabled
Fwd Early Packet Discard(For Higher Threshold of Congestion) : Disabled
Forward RM Cell Priority : Disabled
Forward Cell Los Priority(CLP) : Enabled
Number of Cells Received in the Fwd Direction : 6
Number of Cells Dropped in the Fwd Direction : 0
Number of Epd Packets Dropped in the Fwd Direction : 0
Backward Traffic Type : UBR
Backward Bandwidth Allocated in Kb/s : 28
Backward Priority Queue : LOW
Bkwd Early Packet Discard(For Lower Threshold of Congestion) : Enabled
Bkwd Early Packet Discard(For Higher Threshold of Congestion): Disabled
Backward RM Cell Priority : Disabled
Backward Cell Los Priority(CLP) : Enabled
Number of Cells Received in the Bkwd Direction : 6
Number of Cells Dropped in the Bkwd Direction : 0
Number of Epd Packets Dropped in the Bkwd Direction : 0
switch_prompt #