Unitec American Parking Equipment - Manual (Page 33)

Document Number: GC1001 29
Document Title: Unitec APE Gate and Gate Controller for Multi-Lane Applications Installation Guide
3.2 Portal TI Settings
To configure the Portal TI, login to Portal Management then follow this path to
navigate to the configuration screen:
Portal Management>Setup>Washes>Manage Bays>Equipment
Figure 22. Bay Management Options Screen
1. Enter the appropriate information in the following fields:
• Wash Manufacturer & Model – Select the manufacturer and model from
the drop-down list to pre-load values for the other fields on the form.
• Wash Handshake – The Portal TI supports three types of “Wash-In-Use”
handshaking:
o Wash-In-Use (voltage present) – The car wash activates the wash-in-
use signal for the entire time the car wash is in use. This option needs
to be selected if an entry gate is being used in conjunction with the
Portal.
• Relay Latching –This needs to be “off” if an entry gate is being used in
conjunction with the Portal.
• Fault OOS Detection – Check this box if a fault signal is available from
the wash equipment.