Unitec Multi-Site Accounts - Manual (Page 5)

3
Figure 3. Edit Remote Site Configuration Screen
6. Enter the Site Name for the remote site.
7. Enter the Remote site’s IP address as the Web Address. Do NOT enter port numbers
(example :9820).
8. Enter the Database ID for the remote site.
9. Select the Time Zone from the drop down menu.
10. Enter the Zip Code to the remote site.
11. Click Save.
12. Repeat these steps for each remote site you’d like to connect.
NOTE: These steps will need to be repeated at EACH publishing site.
Figure 4. Shared Payments Publish Screen
13. Select Publish Sites, then click Start. This will push the site connection information to all
of the publishing and remote sites in the network.
Note: This step will need to be repeated if a new site is added to the network.